Changelog
This page provides a changelog that lists new releases and updates to the PerceptiLabs products and services.
Free Version
Note
To upgrade to the latest version of PerceptiLabs, run:
$ pip install --upgrade perceptilabs
To install or upgrade to the latest nightly build of PerceptiLabs, run:
$ pip install --upgrade pl-nightly
Version 0.12.25 (Sept 21, 2021)
Bug Fixes
Removed a bug which blocked some preprocessing from finishing if the data took too long to preprocess
Version 0.12.24 (September 14, 2021)
New Functionality
The export list is now scrollable
Bugs Fixes
You will now always see the preview of the components when you enter a workspace
If you get a crash when starting the training, you will get an error which sends you back into the workspace and tells you what went wrong
The Jupyter Notebook export option has been temporarily hidden to remove confusion, until the export is working again
Version 0.12.23 (September 8, 2021)
Bugs Fixes
Fixed a bug where models were not loaded correctly at login
Version 0.12.22 (September 3, 2021)
New Functionality
The pre-processing pipeline is now exported with the the model
Bugs Fixes
Exporting TensorFlow models now works again
You are now required to enter a path before exporting a model (so it has somewhere to export to)
Partially-trained models now show up in the export list
Refreshing the page will no longer make you loose the Statistics view
Convolution components without a connection will no longer make the model look like it still works
Version 0.12.21 (August 24, 2021)
Bugs Fixes
Fixed the case where if there was an issue with the connection, the questionnaire couldn't be closed.
Trained models will now appear in the export view.
The kernel status icon in the bottom right of the workspace now updates appropriately.
Changing settings of a component will now always take effect, which it didn't before in some cases.
Version 0.12.20 (August 16, 2021)
New Functionality
Export now has its own page
Bugs Fixes
There is now only one Dice loss
The Kernel status at the bottom right of the workspace will no longer be permanent red
The Kernel no longer seemingly stops responding randomly
Only trained models can now be seen in the testing view
Version 0.12.19 (August 10, 2021)
New Functionality
Segmentation tests now have the PerceptiLabs theme
Tests are now using caching and will therefore be a lot faster for large datasets or datasets that use pre-processing
Bug Fixes
The scrollbar in the settings will now always go down to the bottom, regardless of screen resolution
Tests will no longer randomly disappear right after appearing, which used to happen if you ran a larger test
Segmentation test image visualizations are no longer mirrored
Quantized export has now been re-enabled. Note: It's restricted to models with a single input and single target
The login questionnaire has been re-enabled
Version 0.12.18 (August 3, 2021)
New Functionality
Previews in the workspace are now calculated much faster
Training will now start faster than before in case you are using any pre-processing
UNet has been added, which includes:
A UNet component
Improved segmentation visualizations
Two Segmentation tests: A Segmentation metrics table and an image slider that let's you see the five best and worst predictions
One new dice option called "Keras Dice" which is calculated slightly differently
You can now update the "Data Settings" on the workspace, which includes:
Changing Data Types
Changing pre-processing
Changing partition
Changing data path
Bug Fixes
Image Target will no longer throw an error in the Data Wizard
Stopping training will no longer cause a crash if stopped at the wrong time
Version 0.12.17 (July 27, 2021)
New Functionality
Labels are now shown as text during training, making it easier to see which class is which.
The Softmax component has been removed because of redundancy.
If you stop training and start it again, you will now see it continue from the previous statistics if you choose to start from the last checkpoint.
The error messages in the Data Wizard have now been improved to give a hint as to what may be wrong.
Random Partition now uses a fixed seed.
Bug Fixes
Compressed models can now be exported again without crashing.
Version 0.12.16 (July 20, 2021)
New Functionality
Preview generation in the workspace is now faster.
Pre-processing has been improved by pre-generating the samples rather than generating them on the fly.
Bug Fixes
Backend requests have been cleaned up and should be more responsive in general.
Crashes for very small (1x1) previews will no longer occur.
Version 0.12.15 (July 14, 2021)
New Functionality
Improved recommendations for Categorical Decoders.
Bug Fixes
The Data Wizard no longer closes automatically when an error occurs.
The questionnaire is now visible when you first start the tool.
Version 0.12.14 (July 6, 2021)
New Functionality
You can now select "Do not use" as an Input/Target type, which will ignore that column when creating the model.
Added three new datasets that will automatically download when you start the tool the first time: "Human Activity", "Wildfire" and "Covid19".
Bug Fixes
All CSV filetypes should now be readable in the Data Wizard, whereas before some of them caused strange symbols to appear which caused an error.
A visual bug causing the entry boxes in the Training Settings to be too large has now been fixed.
Version 0.12.13 (July 1, 2021)
New Functionality
A new onboarding experience has been added.
We have now upgraded to using TensorFlow 2.5! Make sure to upgrade your CUDA to 11.2 and cuDNN to 8.1 to be able to use GPUs with this version.
Bug Fixes
The Accuracy, Loss and other line charts are no longer empty before the second epoch starts.
Internal error messages relating to the Data Wizard and modelling are now properly logged.
You can no longer set height or width to 0 in the Reshape pre-processing in the Data Wizard.
Version 0.12.12 (June 30, 2021)
New Functionality
"Kernel Offline" should no longer happen, instead, error messages will be much more precise as to the cause of the issue.
The error messages in the workspace and the Data Wizard have been improved.
The numerical target statistics view (often what you use for regression) has now been improved.
The pre-processing UI has been updated.
Bug Fixes
Onboarding will now be visible when you first enter the tool, rather than only appearing after selecting the ModelHub in the left menu.
The Binary data type has been temporarily disabled because Categorical is currently better in every way.
Version 0.12.11 (June 24, 2021)
Bug Fixes
Fixed a dependency issue in the frontend that was causing strange behaviours such as being unable to delete models, test popup not showing up, a project modal showing up, etc.
Version 0.12.10 (June 22, 2021)
New Functionality
Test loading message is now complete.
Image Targets now have an updated look in the statics view during training.
There is now a loading indicator after pressing Run Model or Customize in the last stage of the Data Wizard.
A legend has been added to the Predictions for Each Class chart.
The resource section in the top right has been improved.
There is now a loading indicator after you choose to Customize or Run a model from the Data Wizard.
You can now access our community sites like YouTube, Forum, Slack and GitHub through the top-right icons.
In the Training Settings, you can now choose to automatically save the weights of your model every epoch, rather than just at the end of the training.
Notebook view has temporarily been removed as that currently is not up to date.
There is now a restriction on creating models with only a single Target column, until we implement better support for multi-modal problems.
Text inputs are now possible to use; they will use bag-of-word as the preprocessing method.
The UI for the test view modal has been updated.
A Python 3.8 distribution is now included.
Bug Fixes
PerceptiLabs will no longer install (or prompt you to install) gym['atari'].
Ctrl+V now works properly in the custom code.
Tests are no longer interrupted by changing views.
The Categorical column selection in the Data Wizard will now always be an option, even if it's not recommended.
A lot of unnecessary kernel calls have been removed.
Extensions of your loaded data are now case insensitive.
When refreshing the tool, you will now open the model you were viewing rather than the tool going through all of them.
Version 0.12.9 (June 16, 2021)
Note: this version has been removed due a critical error.
Version 0.12.8 (June 8, 2021)
New Functionality
Loading messages for tests have been improved so you can now see their progression.
The training statistics have now been updated for categorical targets during training; you can now see:
Loss per epoch
Accuracy per epoch
Prediction versus ground truth for a single sample
Predictions for each class summed over all samples in that epoch
Bug Fixes
A deleted model will now stay deleted, rather than randomly coming back.
It's now no longer possible to press the Open button in ModelHub without having any models selected to go to a bugged workspace.
Version 0.12.7 (June 4, 2021)
New Functionality
A few preprocessing options have been added: Random cropping. Random rotation.
The Data Wizard has been improved to make it more intuitive.
We have added a direct messenger to the tool, so you can easily get in contact with us. You can find it under the ? -> Send us a Message.
Bugs Fixes
The Kernel will no longer crash on certain learning rates.
Fixed a backwards compatibility issue with versions earlier than 0.12.4.
Version 0.12.6 (June 1, 2021)
New Functionality
There is now a loading message when running a test.
A few preprocessing options have been added:
Flipping images
Resizing images
Min-Max and Standardization are now both Normalization options
Bug Fixes
Data Wizard now loads faster after selecting a file.
Data Wizard will no longer skip past steps from clicking on Continue too many times.
Version 0.12.5 (May 25, 2021)
New Functionality
Binary data now works with Yes/No and yes/no as well as True/False, true/false, 1/0.
Multiple columns now work inside the tool, although some manual work is still required to put the model together.
You can now pre-process your data inside the Data Wizard by pressing the little symbol on top of the column. The pre-processing available so far is Normalize for Image and Numerical data.
The data types in the Data Wizard are now filtered on what is possible for each column. For example, if a column contains a path then it can only be Image type (and later on Text).
Bug Fixes
Fixed a common error message "getBoundingClinetRect" which sometimes stopped the workspace from functioning as it should.
The components in the map will no longer have eternal spinners if you start training straight from the Data Wizard.
The Custom component can now be used without causing a crash.
Dropout can now be used in the Dense component.
Binary data now works as intended. Fixed a bug where data types sometimes were not recommended.
Fixed an issue where the Next button sometimes was disabled.
Training progress will now not be accidentally shared between models.
Reshape settings have now been fixed.
Training results will no longer randomly show up after already having interacted with it.
Version 0.12.4 (May 18, 2021)
New Functionality
A data type will now be automatically recommended for each column.
Bug Fixes
Tests for a model are now removed when that model is deleted.
The Output component has now been properly renamed to Target.
The questionnaire will no longer get stuck where you are unable to close it by pressing Confirm.
Pressing Run test in the ModelHub will now navigate you to the correct test view.
The Reset component button has been removed from the Input and Target components as they have no settings to reset.
Version 0.12.3 (May 11, 2021)
New Functionality
The Create model UI has been updated to look a bit cleaner.
Bug Fixes
The dropdown on the components in the workspace now works.
Data settings can no longer be randomly copied over to another model (this used to cause the model to use the wrong input and target data).
Training can now be started in incognito mode.
Version 0.12.2 (May 7, 2021)
Bugs Fixes
Fixed progress bar during training; it now reaches 100% every time.
Pre-trained components now automatically use their preprocessing function to ensure that data input to them is correctly formatted.
Results are now seen in the Training Completed popup.
Version 0.12.1 (May 7, 2021)
Note: this version has been removed due a critical error.
Version 0.12.0 (May 5, 2021)
New Functionality
The old Create Model popup together with the template has been removed. This means that models created pre-0.12 will no longer be usable after upgrading to 0.12.0.
A new featured called Data Wizard has been introduced. The Data Wizard provides a more structured way to load your data, making the models data centric. It works by:
allowing you to load a CSV file.
allowing you to define the CSV file (specifying which columns are the input and target, and their types).
providing you with a recommended model that can be run immediately.
There are currently four supported column types in the Data Wizard: Numerical, Categorical, Binary, and Image, allowing you to mix them to build models such as: Image Classification, Regression, Segmentation, simple Image Generation, Autoencoder, etc. Read more about the Data Wizard here. Note that this link will become available once we document this functionality.
Object Detection has been temporarily removed.
GAN has been temporarily removed.
Pre-trained models have been added as components under the Deep Learning, including VGG16, ResNet50, InceptionV3, and MobileNetV2.
Data components have been removed and replaced by Input and Target components.
Training components have been removed. The training engine is now running behind the scenes and has been generalized to work for all above mentioned cases.
The Statistics View has received a slight update, where it now shows statistics based on the Inputs and Targets rather than the Training components.
The Test View has been reworked. You can now run one (or many) tests on one (or many) of your models. The current tests available are: Confusion Matrix and Metrics Table.
Bug Fixes
Changing the model path will no longer cause saving checkpoints to crash in Windows.
Zooming by inputting a number will no longer cause the components placement to change.
The correct TensorFlow version (2.4.1) is now shown in the bottom right.
.
Last updated